Product development has been discontinued - this product will not be manufactured.

The V6 features the ability to switch six component video and composite video (or digital audio) sources to six different locations. Adding to its versatility are six RJ45 output ports which provide the ability to distribute component video and digital audio over CAT5. Deliver your favorite video sources to even more places (up to thirty-six) by cascading multiple units together. In addition, when utilizing RTI controllers and processors the V6 provides status feedback via seamless two-way communication.

Key Features

• 6 Component (Y, Pb, Pr) video outputs
• 6 Component (Y, Pb, Pr) video source inputs
• 6 Digital (S/PDIF) audio outputs
• 6 Digital (S/PDIF) audio source inputs
• 6 Component video / SPDIF over CAT5 RJ45 zone output connectors
• Compatible with most standard component video/SPDIF over CAT5 receivers, including RTI’s CAT5-RX
• Buffered outputs for all RCA source inputs
• Buffered inputs for all loop source inputs
• Input/output expansion port provides auto RTI A8/V6 sensing for input validation across multiple units
• Expandable to 48 zones by cascading multiple units
• Signal sensing on all inputs for communicating status to control systems
• 1 Infrared (IR) input port for control
• 1 RS-232 port for control and bi-directional communication
• 1 Ethernet (10/100 Base-T) port for control and programming/setup
• Rack mountable or free standing

Specifications

AC Input Voltage	120VAC +-10%, 60Hz or 240VAC +-10%, 50Hz Auto selecting
Control In/Out	RJ-45 female for RTI system control
IR Input Connections	Phoenix Contact
Ethernet	RJ-45 female for network control
USB	System configuration
RS232 Port	DB-9 for system configuration and control
Loop Input/Output	68 pin micro DB68 female
Dimensions (with removable rack ears & front cover) HxWxD	3.5in(89mm) x 19in(483mm) x 11.5in(292mm)
Dimensions Chasis (without rack ears & front cover)HxWxD	3.5in(89mm) x 17in(432mm) x 11in(280mm)
Weight	10.2 lbs (4.62kg)
Operating Temperature	C -10 to +40 degrees F +14 to +104 degrees
Specs - Composite Video/Digital Audio
Input Level (max)	+/- 1.2 Volts
Input Impedance	75 Ohms
Output Level (max)	+/-1.2 Volts
Output Impedance	75 Ohms
Frequency Bandwidth	50 MHz or better (± 3 dB) / 20 MHz or better (± 1 dB)
Crosstalk	< -50 dB (f = 5 MHz)
Differential Gain	< 0.2% or better (f = 3.58 MHz)
Differential Phase	< 0.2° or better (f = 3.58 MHz)
Signal to Noise Ratio	> 65 dB (Vin = 0.7 V, 100% IRE)
Zone S/PDIF inputs	Six (6) S/PDIF digital audio source inputs Gold plated RCA jacks (can also be used for composite video)
Zone S/PDIF outputs	Six (6) S/PDIF digital audio zone outputs Gold plated RCA jacks (can also be used for composite video)
Specs - Component Video
Bandwidth	300MHz or better (± 3dB) 200MHz or better (±1.5dB) 60MHz or better (±1dB)
Impedance	75 ohm
Signal Level	1.2 Volts p-p
Crosstalk	< -60 dB (f = 5 MHz) / < -30 dB (f = 150 MHz)
Signal to Noise Ratio	> 65 dB (Vin = 0.7 V), 100% IR
Zone Video Inputs	Six (6) component (Y, Pb/CB, Pr/CR) Gold plated RCA jacks
Zone Video Outputs	Six (6) component (Y, Pb/CB, Pr/CR) Gold plated RCA jacks
Specs - Component Video / SPDIF over CAT5
Recommended cable	Use CAT-5 UTP or better, 100 ohms at 100MHz
Capacitance	20pF/FT max, Attenuation 6.6dB/1000FT at 1MHz max.
Bandwidth	225 MHz, -3 dB large signal bandwidth 450 MHz, -3 dB small signal bandwidth
Signal Level	Drives 1.4 V p-p video signal into doubly terminated 100 Ohms UTP cable
Balance Error	Output balance error -60 dB @ 50 MHz
Isolation between amplfiers	80 dB @ 10 MHz
Distortion	64 dB SFDR @ 10 MHz on 5 V supply, RL, dm = 200 Ohms

* All specifications subject to change without notice.